Select [Auto] will enable this feature if the system supports it. This mode speeds up the boot-up routine by skipping memory retestings. DO NOT place jumper caps over these connectors. Unplug the power cord from the wall socket before touching any component. Refer to your OS documentation for more information.

Uploader: Kigaran
Date Added: 6 July 2009
File Size: 16.62 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 12111
Price: Free* [*Free Regsitration Required]

The lever clicks on the side tab to indicate that it is locked. Cylinders This field configures the number of cylinders.

Asrock K7VT2 V2.01 Motherboard socket A 462 KT266A AGP 5x PCI LAN Sound USB IDE

Use keys to move between the Hour, Minute and Second fields. Do not over-tighten the screws! Incorrect settings may cause the system to fail to recognize the installed hard disk.

The following table lists the keys found in the legend bar with their corresponding functions. The default is 1.

You can also restart by turning the system off and then back on. Unlock a DIMM slot by pressing the retaining clips outward. Refer to your OS documentation for more information. Replace the system cover. Align the card connector with the slot and press firmly until the card is completely seated on the slot.


ASRock K7VT2 – motherboard – ATX – Socket A – KT266A

This allows the user to select the value as operating frequency. User password has been set.

All changes are discarded. Thermal grease between the M7vt2 and the heatsink is also needed to improve heat transfer. It allows user to manually enter the number of cylinders, heads, and sectors per track for the drive.

Asrock K7VT2 V Motherboard socket A KTA AGP 5x PCI LAN Sound USB IDE

The Setup program is designed to make it as easy to use as possible. Make sure to set the partition of the Primary IDE hard disk drives to active. However, lqn is not recommended unless you thoroughly knows the feature. Enable or Disable onboard LAN. No password has been set.

ASRock K7VT2 – motherboard – ATX – Socket A – KTA Overview – CNET

Select [Auto] will enable this feature if the system supports it. This field shows the status of the Supervisor Password.

Select Parallel Port address or disable Parallel Port. This loads the default values for all setup options. Also remember to use a grounded wrist strap or touch a safety grounded object before you handle components.


When the menu appears, the hard disk drive field displays the size for the hard disk drive that you configured. If automatic detection fails, this may due to the hard disk is too old or too new.

Select address for Game Port or disable Game Port. Connector FDD connector pin floppy see p. Select mode for the IR transmission port. Chapter 1 and 2 of this manual contain introduction of the motherboard and step-by-step installation guide for new DIY system builders.

This field shows the status of the User Password. The default is Failure to do k7ft2 may cause physical injuries to you and damages to motherboard components.