Ayarlar kisminda manuel convergence ayarlari var. There you can read much parameters and proceed with most of the adjustments. The version number is shown by pressing the ‘AUX’ button. If the main menu also appears with the service menu just press ‘MENU’ again to clear it. Switch off with RC. Remove the top of the cabinet.
|Date Added:||22 December 2018|
|File Size:||16.84 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Press and hold red button on RC and then switch on with the mains switch cca 10s.
Enter new modulator frequency with the numbers The index 01 of the part nr. Obviously option 2 is the ekrsn method because the settings have to be changed using a remote control anyway Select and adjust with cursors. Vestel yeni model tvlerde servis menusu: You can damage a monitor!
puhutv | Sen Nasıl İzlersen
Now the combination lock is unlocked and one can switch on again in the normal manner. In fact this method let you use an ordinary Remote control but you also need to open the back cover.
Simultaneous press blue button on RC and switch on TV with main switch. Switch off with RC. Switch off with the mains switch.
This mode is primarily intended to be used when the non volatile memory has been replaced. This is only possible once on replacement of the NVM or uP. Re-fit the top of the cabinet.
Beko B48LB9486 48′ 121 Ekran [4K] Ultra 600 Hz Smart LED TV – 1500 azn
Enter the numers 4 9 3 4 on the remote control handset in this order and confirm with the ‘OK’ button. Press eekran hold ‘VT’ on RC then switch on with the mains switch.
If the main menu also appears with the service menu just press ‘MENU’ again to clear it. Yalniz kesinlikle girmeni tavsiye etmem servis bile ayarlari yapamaz. Switch off TV with main switch. With the special service remote control, a special code is sent to enter the service mode.
Beko POS 500 TR – 15″” EKRAN
Re-fit the top beki cabinet. Cihaz tv ye monteli. Cancelling the Hotel Mode: Switch the recorder on. Service technicians have the means of entering service mode using a special remote control.
Or short M25, M25 on board and then switch on TV. Press the button ‘S’ on the RC.
Tüm model TV’lerin servis meünüsüne giris kodlari. [Arşiv] – TurkeyForum Community
If TV is still in st-by press 2x’TV’, ‘i’. Keep the two volume buttons pressed until the display indicates Pr. The other way is to short the two service pins on the signal panel pins 2 and 3 of connector Press and hold blue button and then switch on with the mains switch.
Unplug the B1 connector on the sequence control. There you can read much parameters and proceed with most of the adjustments.
Press blue button again.